Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to remove the rear bumper on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Rear bumper
Operation: How to remove the rear bumper on Peugeot 207

Let's see in this video how to remove, in simple steps, the rear bumper on a Peugeot 207. First we open the boot lid and start removing the taillights; to do this we unscrew the plastic screw that we find on the back and disconnect the electrical connectors of the bulbs. Once removed we can unscrew the screws of the bumper, which we find on the lower part of it (where there are also clips) and also on the wheel arches; then we begin to gently unclip the bumper on the sides and then remove it from the front, disconnecting any electrical connectors!


Posted on 23 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos