Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace coolant in Peugeot 207?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Antifreeze liquid
Operation: How to replace coolant in Peugeot 207?

In this tutorial we can see how to replace the coolant in the Peugeot 207, a very simple and fast operation. Before proceeding, let's make sure that the engine is completely cold in order to operate in complete safety. Let's start by opening the bonnet, then open the expansion tank cap, move underneath the vehicle and disconnect the radiator hose. Once all the old liquid has been removed, open the indicated valve located under the air filter, reconnect the tube and insert the new liquid, taking care to let the air present inside the circuit escape.


Posted on 11 April 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - Where is the bleeder valve of the Peugeot 207 cooling system located? Read Answer
    • 207 2006-2015 - How to change the coolant on the Peugeout 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos