Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Temperature Sensor on a Peugeot 207 1.4 VTi

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine coolant temperature sensor

Video tutorial

Today's instructions will allow you to dismantle and replace the coolant temperature sensor of the engine on a Peugeot 207 1.4 VTi. First, open the bonnet of the vehicle and locate the coolant temperature sensor, which is found at the bottom; disconnect its electrical connector and unscrew the temperature sensor with a star socket, as shown in the video.

At this point, install the new coolant temperature sensor, tightening it by hand and then with a spanner; finally, reconnect it!


Posted on 4 March 2026 by ScegliAuto


Related tutorials

How to Remove the BSI Unit on a Peugeot 207 1.6 VTI
How to Remove the BSI Unit on a Peugeot 207 1.6 VTI
Peugeot 207 (2006-2015 / MK 1) In this video, we will see the steps to remove and replace the BSI unit located in the engine compartment of the Peugeot 207 1.6 VTI. First, open the…
Throttle Body and MAF Sensor Location on the Peugeot 207 1.6 VTI Petrol
Throttle Body and MAF Sensor Location on the Peugeot 207 1.6 VTI Petrol
Peugeot 207 (2006-2015 / MK 1) In this video, you can see the locations of both the throttle body and the MAF sensor on the Peugeot 207 1.6 VTI petrol: the throttle body is mounted…
How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos