Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the BSI Unit on a Peugeot 207 1.6 VTI

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Control unit

In this video, we will see the steps to remove and replace the BSI unit located in the engine compartment of the Peugeot 207 1.6 VTI. First, open the bonnet and disconnect the battery terminals to avoid short circuits; then remove the cover of the fuse box and the BSI unit. Now disconnect the various electrical harnesses by pressing on the side connectors, and unscrew the screws found at the base using a socket spanner; finally, remove and replace the entire unit, following the video to the end!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the BSI Unit on a Peugeot 207
How to Program the BSI Unit on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To program the BSI unit on a Peugeot 207, you must first disassemble it so that it can be connected to the diagnostic tool's cables. Once the unit is…
How to Reset the BSI Module on a Peugeot 207
How to Reset the BSI Module on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Below are the instructions to perform a forced reset of the ECU or BSI module on a Peugeot 207. To carry out a forced reset on the BSI module, you ne…
How do you reset the BSI unit of the Peugeot 207?
How do you reset the BSI unit of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to reset the BSI unit on the Peugeot 207, you need to connect a diagnostic tool to the vehicle's OBD port. Once this connection is establish…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos