Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI Module on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

Video tutorial

Below are the instructions to perform a forced reset of the ECU or BSI module on a Peugeot 207. To carry out a forced reset on the BSI module, you need to use specific diagnostic software connected to the vehicle's OBD port; generally, there is a procedure that allows manual resetting of the BSI module, although in this case, you will be directly modifying the ECU parameters.

Select the make and model of the vehicle, then reset any warning lights present on the dashboard.


Posted on 22 June 2026 by ScegliAuto


Related tutorials

How to Program the BSI Unit on a Peugeot 207
How to Program the BSI Unit on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To program the BSI unit on a Peugeot 207, you must first disassemble it so that it can be connected to the diagnostic tool's cables. Once the unit is…
How to Remove the BSI Unit on a Peugeot 207 1.6 VTI
How to Remove the BSI Unit on a Peugeot 207 1.6 VTI
Peugeot 207 (2006-2015 / MK 1) In this video, we will see the steps to remove and replace the BSI unit located in the engine compartment of the Peugeot 207 1.6 VTI. First, open the…
How do you reset the BSI unit of the Peugeot 207?
How do you reset the BSI unit of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to reset the BSI unit of the Peugeot 207, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port can be foun…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos