Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the BSI unit of the Peugeot 207?

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

Video tutorial

In order to reset the BSI unit of the Peugeot 207, it is necessary to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the lower left side of the dashboard, next to the steering column. Once the tool is connected to the port, it will be possible to select the model of the car and its corresponding version, allowing the BSI unit to be reset completely.

After the reset, the scanner can be disconnected and it should be checked that no other errors are displayed on the instrument panel.


Posted on 13 December 2024 by ScegliAuto


Related tutorials

How do you reset the BSI unit of the Peugeot 207?
How do you reset the BSI unit of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to reset the BSI unit on the Peugeot 207, you need to connect a diagnostic tool to the vehicle's OBD port. Once this connection is establish…
How to Reset the BSI Module on a Peugeot 207
How to Reset the BSI Module on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Below are the instructions to perform a forced reset of the ECU or BSI module on a Peugeot 207. To carry out a forced reset on the BSI module, you ne…
How to Program the BSI Unit on a Peugeot 207
How to Program the BSI Unit on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To program the BSI unit on a Peugeot 207, you must first disassemble it so that it can be connected to the diagnostic tool's cables. Once the unit is…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos