Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to program the Peugeot 207 BSI control unit?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Control unit
Operation: How to program the Peugeot 207 BSI control unit?

In order to program the Peugeot 207's BSI control unit, first of all it must be removed, so that it can be connected to the relative cables of the diagnostic tool. Once the control unit has been connected, it will be necessary to follow all the instructions that are shown in the tutorial, so that all the old data of the BSI control unit can be extracted, thus overwriting the new ones. Once all the files have been correctly imported, it will be possible to disconnect the diagnostic tool from the ECU, installing it in the car.


Posted on 15 October 2022 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How to disable ESP on Peugeot 207? Read Answer
    • 207 2006-2015 - How much does it cost to overhaul the power steering of the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos