|
Do it yourself
| |||
| ||||
Throttle Body and MAF Sensor Location on the Peugeot 207 1.6 VTI Petrol
Model: Peugeot 207
MK 1
- Years 2006-2015
In this video, you can see the locations of both the throttle body and the MAF sensor on the Peugeot 207 1.6 VTI petrol: the throttle body is mounted directly on the intake manifold, near the air filter. To access it, you need to remove the air filter assembly by unclipping or unscrewing the screws that secure the filter box and remove the air intake hose. Identify the throttle body, which is a metal/plastic component with an electrical cable and three screws. To remove it, disconnect the electrical connector, allowing you to take it off for cleaning or replacement. The MAF sensor is located on the air hose, between the filter and the throttle body. Follow the air hose from the filter to the engine: the MAF sensor is a small component with an electrical connector and a 10 mm screw securing it. Disconnect the electrical connector, loosen the screw, and gently detach it. Do not touch the internal filament of the MAF for any reason! To clean it, use a specific MAF sensor spray, never water or compressed air.
Posted on 4 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 207
(2006-2015 /
MK 1)
Today's instructions will allow you to dismantle and replace the coolant temperature sensor of the engine on a Peugeot 207 1.4 VTi. First, open the b…
Peugeot 207
(2006-2015 /
MK 1)
The vehicle referenced in the video is a Peugeot 207 1.4 VTi with the EP3A engine, known for the internal plastic gear that strips, causing fluctuati…
Peugeot 207
(2006-2015 /
MK 1)
In this video, we will see the steps to remove and replace the BSI unit located in the engine compartment of the Peugeot 207 1.6 VTI. First, open the…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
