Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator on the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Alternator

The alternator on the Peugeot 207 is located in the engine compartment: to remove it, you need to locate the throttle valve, which is situated low on the left side of the engine. This will need to be removed from its housing by undoing the screws that secure it to its ducts; you will also need to disconnect the connectors attached to its sensors, completely removing it. After removing the valve, you will be able to locate the alternator beneath it: by undoing the screws that secure it to the supports and disconnecting its connectors, you will be able to remove it completely.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator on a Peugeot 207?
How to Replace the Alternator on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the alternator on a Peugeot 207, open the bonnet to access the components inside the engine bay: the alternator is located on the left sid…
How to Remove the Alternator on a Peugeot 207
How to Remove the Alternator on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the alternator from a Peugeot 207? Open the front bonnet and remove the alternator along with all its components. Disconnect the batter…
How to Change the Alternator on Peugeot 207
How to Change the Alternator on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Removing the alternator on a Peugeot 207? Here's how to take it out from the engine compartment. Pull the lever located at the bottom left of the das…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos