Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the alternator in a Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Alternator

Ok, removing the alternator on a Peugeot 207 is not very difficult, but it requires a bit of patience. First of all, disconnect the battery, otherwise you risk unwanted sparks. Then remove the service belt by loosening the tensioner. Now you need to unscrew the bolts that secure the alternator to the engine, usually there are three. Pay attention to the electrical connectors: disconnect them gently, maybe marking where they go to reassemble them without going crazy. Once free, the alternator may be a bit stuck: move it calmly and remove it carefully. Reassembling everything is the opposite, but be sure to tighten the belt properly! If you think that all of this is too difficult to do in DIY mode, then call a specialized workshop.

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Alternator on a Peugeot 207
How to Remove the Alternator on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the alternator from a Peugeot 207? Open the front bonnet and remove the alternator along with all its components. Disconnect the batter…
How to Change the Alternator on Peugeot 207
How to Change the Alternator on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Removing the alternator on a Peugeot 207? Here's how to take it out from the engine compartment. Pull the lever located at the bottom left of the das…
How to Replace the Alternator on a Peugeot 207?
How to Replace the Alternator on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the alternator on a Peugeot 207, open the bonnet to access the components inside the engine bay: the alternator is located on the left sid…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos