Do it yourself
| ||||
|
Peugeot 207 - Video tutorial
Model: Peugeot 207
MK 1
- Years 2006-2015 To be able to replace the coolant of the Peugeot 207 you have to go and open the hood, so that you can have access to the components inside the engine compartment. In particular, it will be necessary to access the rear part of the radiator, where the pipe through which the coolant flows will be connected. This pipe must therefore be disconnected in order to collect the coolant inside a suitably positioned container. Once it is finished, it will be necessary to reconnect the hose and insert the liquid inside the filler vent located on the tank at the top left of the engine compartment.
Posted on 4 July 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the fuel cap on Volkswagen Polo 5 (6R)In this video tutorial we will see how to open the cap and the fuel flap on Volkswagen Polo 6R, fifth series, by following these simple steps. First of all we go to open the car with the remote control, in order to unlock all the car locks; after which we go to press on the left side of the flap, in order to unlock the actuator and open it, as shown in the video. At this point we are going to unscrew the fuel cap to refuel; once finished the same we can screw the cap and finally close the fuel flap! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |