Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Shift knob

To replace the gear knob of your Peugeot 307, just a few simple steps are enough. Let's find out together what they are so you can complete the operation in a few seconds and without any difficulty. First of all, park the car on a flat surface and make sure to turn it off completely, then grab the gear knob and pull it upwards to remove it. Once you have done this, install the new gear knob and make sure there is no play during gear changes. At this point, the replacement procedure is successfully completed and you can start the car.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Peugeot 307
How to Replace the Gear Knob on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before starting, sit in the driver's seat of your Peugeot 307. Begin by unclipping and lifting the lower base of the gear lever gaiter. Next, grip th…
How to replace the gear knob of the Peugeot 307
How to replace the gear knob of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To independently replace the gear knob in your Peugeot 307, you just need to follow all the steps described in our new mini guide. First of all, buy …
How to change the gear knob of the Peugeot 307.
How to change the gear knob of the Peugeot 307.
Peugeot 307 (2001-2009 / MK 1) In the following guide aimed at all of you who own a Peugeot 307, we will help you complete the replacement of the gear shift knob quickly and safely…

Replacing the Front Headlamp Bulb on the Seat Altea

The following steps will show you how to dismantle and replace the bulb in the front headlamp of the Seat Altea, following the instructions below. First, open the vehicle's bonnet and start by removing the plastic protective cover of the bulb; then disconnect its electrical connector and unclip the bulb to remove it from the optical unit, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; connect it and reassemble the plastic cover, finally reassembling the optical unit!

Watch the video!


by ScegliAuto

More videos