Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear windshield wiper cover of the Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

Video tutorial

In this video we see how to remove the rear windshield wiper cover of a Peugeot 407: it is necessary to open the rear hatch glass, and then rotate the wiper blade so that it is in a vertical position. Insert a thin rod to push the tab slightly towards the inside of the mechanism, being careful, as excessive pressure could break it. At the same time, push a thin blade into the slot, in order to lift the cover upwards.

Use the blade from both sides, until the cover can be removed by hand. Replacement is then only a matter of aligning the fitting, which is achieved by firmly pushing until reaching the position.


Posted on 5 February 2025 by ScegliAuto


Related tutorials

Where to Find the Fuses of the Peugeot 407?
Where to Find the Fuses of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The fuses of the Peugeot 407 are contained within two fuse boxes installed in the vehicle: the first is located in the lower part of the dashboard to…
Where Are the Fuses on the Peugeot 407?
Where Are the Fuses on the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) On the Peugeot 407, all fuses are located within dedicated fuse boxes installed in the vehicle: this type of car has three boxes. The first is locate…
Where are the fuses located in the Peugeot 407?
Where are the fuses located in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) All fuses in the Peugeot 407 are divided among the specific fuse boxes installed in the vehicle: in this car model, you can find three boxes. The fir…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos