Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service inspection light of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

In a few simple steps, we will reset the service light of the Peugeot 206. First, we get into the car and start pressing and holding the reset button located on the right side of the instrument panel; then we turn on the panel by turning the key to position one, and wait for the countdown to finish on the small display, as shown in the video. At this point, we turn off the panel and start the engine, verifying the actual reset of the maintenance key and the kilometers remaining before the next service.

Posted on 15 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Peugeot 206
How to reset the service indicator on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to reset the maintenance reminder for the engine oil change (service) of the Peugeot 206. …
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video tutorial shows how to reset the maintenance light on a Peugeot 206. To perform this procedure, insert the key without turning it, then pre…
How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The procedure to reset the service light on a Peugeot 206 is simple and quick. To reset the service light, insert the key into the ignition without t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos