Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

First, disconnect the battery cables to protect any sensitive circuits, allowing you to work safely. Now, lift the display of your stereo starting from the top, using a plastic lever.

Then, disconnect the connector that powers the area around the display and unscrew the screws securing the display. Extract it and disconnect the connector that powers it. Next, remove the screws securing the fascia, allowing you to fully extract the stereo unit.

Finally, retrace the steps in reverse for reassembling the various components.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to install the radio in a Peugeot 2008
How to install the radio in a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Installing a new car radio in a Peugeot 2008 is a very simple operation that you can do on your own. To begin, you need to remove the old radio; firs…
How to Remove the Car Radio from a Peugeot 2008
How to Remove the Car Radio from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 2008. Using a thin but sturdy tool, start by prying off and removing the car radio frame, …
How to Remove the Original Radio from a Peugeot 2008
How to Remove the Original Radio from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Let's see how to remove the original radio from a Peugeot 2008. First, use a plastic lever to remove the trim around the radio, then, still using the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos