Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the radio in a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Car stereo

Installing a new car radio in a Peugeot 2008 is a very simple operation that you can do on your own. To begin, you need to remove the old radio; first, remove the centre console of the vehicle using plastic levers and then remove the screws securing the monitor. Disconnect it from its housing and remove the various connectors to extract the old radio from its place. Installing a new radio follows the same procedure. Connect the wiring for the radio body and then connect the wires for the screen. Refit the console and start the radio.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the radio of the Peugeot 2008?
How do you reset the radio of the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) In order to reset the Peugeot 2008 car radio, you need to turn on the instrument panel by inserting the key into the ignition block: once the panel i…
How to Turn Off the Radio on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) If you have this model of car, you may have noticed that turning off the radio is anything but simple, as pressing the power button puts the radio in…
What is the BSI of the Peugeot 2008 and how to install it?
What is the BSI of the Peugeot 2008 and how to install it?
Peugeot 2008 (2013-2019 / MK 1) The BSI, acronym for Body Computer System, is an electronic control unit present in many Peugeot vehicles, whose task is to manage and coordinate the…

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - What to do when the Peugeot 2008 screen does not turn on? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos