Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Peugeot 508?

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely eliminate the Service light that is shown on the instrument panel of the Peugeot 508 by pressing the button 000 located in the central part of the instrument panel, just below the central display: by continuing to hold down this button, it will be possible to insert the ignition key into the corresponding slot and turn it so that the instrument panel can be turned on. At this point, you will need to continue holding down the button, checking that a countdown will appear on the instrument panel starting from ten: at the end of the countdown, you can release the button, noting that the reset will be complete.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

Peugeot 508 (2010-2018 / MK 1) To correctly and safely complete the manual reset of the service indicator light on your first edition Peugeot 508, you must pay attention to the ste…
Peugeot 508 (2010-2018 / MK 1) The service light activates on the vehicle when it is necessary to perform the car service, immediately after we can proceed with the reset of the se…
Peugeot 508 (2010-2018 / MK 1) If you own a first series Peugeot 508 and want to learn how to manually reset the orange service light on the instrument panel of the car even after …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos