Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019

The OBD port on a Peugeot 208 vehicle is located inside the cabin, specifically the port is mounted inside the passenger side glove compartment behind a special side cover. To use the port, it is necessary to open the glove compartment and remove the protective cover; the port is indicated with fluorescent orange color that allows it to be distinguished from other power outlets. Its use is not only to be connected to computerized diagnostics in case of vehicle problems, but also during the resolution of warning light resets, such as resetting the service light.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Peugeot 208 located?
Where is the OBD port of the Peugeot 208 located?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) The OBD port on Peugeot 208 vehicles is located inside the passenger side glove compartment, specifically behind a cover. To use the port, we must op…
Where is the OBD Port on the Peugeot 208?
Where is the OBD Port on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this new mini guide dedicated to your Peugeot 208 first series (2012-2019), discover where the OBD port is located, allowing you to connect a prof…
Where is the OBD Port on the Peugeot 208 2020?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) If you don’t know where the OBD port is located in your 2020 Peugeot 208, follow these steps to find it quickly and easily. First, enter the cabin an…

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos