Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Where is the OBD port of the Peugeot 208 2020 located?

Peugeot 208 - Video tutorial

Model: Peugeot 208 UP, UB, MK 2, UJ, UW - Years 2019-2024
Part: Dashboard
Operation: Where is the OBD port of the Peugeot 208 2020 located?

If you don't know where the OBD port is located inside your 2020 Peugeot 208, don't worry because by following the following steps you will finally be able to locate it in a few seconds and without any difficulty. First of all, go inside the cabin and reach the front passenger seat after making sure that your car is completely turned off. At this point, open the glove compartment and remove the plastic cover located on the side to access the OBD port you were looking for. Finally, connect any diagnostic tool if necessary.


Posted on 16 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 208 2012-2019 - Why did the antipollution warning appear on the Peugeot 208? Read Answer
    • 208 2012-2019 - What are the main lights that we find within the framework of a Peugeot 208? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos