Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Where is the OBD port located on the Peugeot 208 2020?

Peugeot 208 - Video tutorial

Model: Peugeot 208 UP, UB, MK 2, UJ, UW - Years 2019-2024
Part: Dashboard
Operation: Where is the OBD port located on the Peugeot 208 2020?

In the following guide dedicated to your Peugeot 208 Mk2 (2020 model), we will discover where the OBD port is located. This port allows you to connect any professional diagnostic tool with a simple cable, which is useful for discovering and/or resolving errors in the control unit and more. All you have to do is first go inside the cabin and reach the passenger seat. Then, open the glove compartment and remove the small plastic cover located on the left side of the compartment. Finally, locate the OBD port you were looking for.


Posted on 4 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 208 2012-2019 - Why did the antipollution warning appear on the Peugeot 208? Read Answer
    • 208 2012-2019 - What are the main lights that we find within the framework of a Peugeot 208? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos