Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

Today's instructions will allow us to replace the cabin air filter of the Peugeot 3008. First, we open the front door on the passenger side and start removing the plastic partition found at the bottom left, unscrewing the small screw inside the cap; then we remove the cover of the pollen filter box, removing the cartridge inside, as shown in the video.

At this point, we insert the new cabin air filter in the correct direction, finally reassembling the cover and the plastic partition!


Posted on 19 June 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Peugeot 3008
How to Replace the Cabin Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replacing the cabin filter on a Peugeot 3008 is a straightforward task. Start by parking the car on level ground and ensuring it is secure. Then, rem…
How to replace the cabin air filter of the Peugeot 3008
How to replace the cabin air filter of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In the following guide dedicated to all of you who own a 2016 Peugeot 3008, we will help you complete the replacement of the cabin air filter. Before…
How to Replace the Cabin Filter on the Peugeot 3008?
How to Replace the Cabin Filter on the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the cabin filter on the Peugeot 3008, open the glove compartment located on the passenger side. Once the compartment is open, remove the c…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos