Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How do you replace the cabin filter of the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Cabin air filter
Operation: How do you replace the cabin filter of the Peugeot 3008?

The replacement of the cabin filter of the Peugeot 3008 is done by opening the glove compartment located on the passenger side: once the compartment has been opened, it will be possible to remove the hooks inside, so that it can be completely lowered. Once the compartment is lowered, it will be possible to detach the side cover protecting the filter box, removing it from its housing. After removing the old filter, it will be possible to insert the new one into its seat, covering it with the cover and reinstalling the compartment.


Posted on 3 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the Peugeot 3008 cabin air filter located? Read Answer
    • 3008 2016-2023 - Where is the cabin filter of a Peugeot 3008 located? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 antipoline filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos