Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part:

To completely turn off the tire pressure warning light of the Peugeot 108, you need to inflate the tires to the recommended pressure value: this value will be indicated on the sticker attached to the driver's side door pillar. After inflating the tires, you can access the interior of the car and open the glove compartment: after turning on the ignition, you need to press and hold the button inside the glove compartment for a few seconds. This way, the tire pressure warning light will be reset and you can also turn off the ignition.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…
How to reset the tire pressure indicator on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The following instructions will allow us to reset the tire pressure warning light of the Peugeot 108; before resetting the TPMS sensors, it is necess…
How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) It will be possible to reset the tire pressure light of the Peugeot 108 by inflating the tires to the corresponding pressure value: once the inflatio…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos