Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clear the Tyre Warning on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part:

When the tyre pressure of our vehicle, whether it is the Peugeot 108 in question or any other vehicle, is below the value specified by the manufacturer, the warning light activates on the instrument cluster. If a tyre is flat or just under-inflated, we need to inflate it, then proceed to reset the warning as described here: turn on the instrument cluster and hold down the Set button located in the glove compartment on the passenger side until the warning is cleared. Once completed, you can turn off the instrument cluster.

Posted on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 108
How to Reset the Tyre Pressure Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure light on a Peugeot 108, start by turning on the ignition. Notice the yellow light on the dashboard indicating that you nee…
How to reset the tire pressure indicator on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The following instructions will allow us to reset the tire pressure warning light of the Peugeot 108; before resetting the TPMS sensors, it is necess…
How to reset the tire pressure sensor of the Peugeot 108
How to reset the tire pressure sensor of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) If the tire pressure warning light on the instrument panel of your Peugeot 108 continues to stay on even though there is no puncture, do not worry be…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos