Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dimensions and pressures of the Peugeot 108 tires

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Tires

In this video we see the measurement of the tires and the pressure at which the tires of the Peugeot 108 should be inflated. On the tire we read the code of the tire which is 175 (which is the width in centimeters) 65 (which is the height in centimeters) R stands for radial and 14 is the width of the tire expressed in inches. The tire pressure can be found on the driver's door frame (here it is the passenger's door, as it is a right-hand drive) where we can find the table indicating the alternative tires, and the inflation pressure, expressed in Kpa, Bar and Psi. We citizens of the European Union must refer to the value in Bar.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Peugeot 108?
How to Reset the Tyre Pressure Warning Light on a Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on a Peugeot 108, first inflate the tyres to the optimal pressure indicated on the sticker affixed to the dr…
How to Reset the Tyre Pressure Warning Light on the Peugeot 108
How to Reset the Tyre Pressure Warning Light on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) When the low tyre pressure warning light illuminates on your dashboard, first check the actual tyre pressures. If necessary, restore the pressures re…
How to Reset the Tyre Pressure Light on a Peugeot 108
How to Reset the Tyre Pressure Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure light on a Peugeot 108, start by turning on the ignition. Notice the yellow light on the dashboard indicating that you nee…

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos