Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part:

To make the tire pressure warning light disappear from the instrument panel of the Peugeot 108, you will first need to go and inflate the tires, bringing them all to the recommended pressure value: this value will be indicated on the sticker that is stuck on the driver's side door pillar. Once all the tires have been inflated, you can turn on the instrument panel and then open the glove compartment located on the passenger side: here you will find the button that allows you to reset the tire pressure. By holding down this button, you will notice that the warning light will turn off.

Posted on 2 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure indicator on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The following instructions will allow us to reset the tire pressure warning light of the Peugeot 108; before resetting the TPMS sensors, it is necess…
How do you reset the tire pressure warning light on the Peugeot 108?
How do you reset the tire pressure warning light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) In order to reset the tire pressure warning light of the Peugeot 108, you will first need to inflate the car tires until they reach the correct press…
How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) It will be possible to reset the tire pressure light of the Peugeot 108 by inflating the tires to the corresponding pressure value: once the inflatio…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos