Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

To reset the service on the Peugeot 208, you will need to go inside the cabin and press the SET button located below the display. While holding it down, insert the key and turn it until the instrument panel lights up: at this point, you will notice that the display will turn on and a ten-second countdown will start. At the end of the countdown, you can release the SET button and turn off the instrument panel. Once this is done, you must turn on the instrument panel again to verify that the Service light has turned off.

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the service light on a Peugeot 208, turn on the instrument panel and navigate to the menu that appears on the central touchscreen display. S…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to acc…
How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) You can clear the Service light that illuminates on the instrument panel of the Peugeot 208 by turning on the ignition and navigating through the men…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos