Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install footwell lights on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Instrument panel light

In this video we see how to install the lights for the footwell of the Peugeot 208: we will have to remove the panel under the steering wheel. Inside we will find a connector that will be used for the installation of the footwell lights, both for the driver and the passenger. We can find this accessory for example on e-Bay with the code 154213970025 at a price of 22.83 euros each, with free delivery. If your car is not equipped it is not a problem if you also have a small electrical knowledge; you will still be able to do it with a voltage tester disconnect the plug and connect it inside the dashboard. The panel is pressure fitted with three clips and is easily removed.

Posted on 11 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ambient temperature sensor of the Peugeot 208
How to replace the ambient temperature sensor of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the ambient temperature sensor of the Peugeot 208. First of …
Replacing the Number Plate Lights on the Peugeot 208
Replacing the Number Plate Lights on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this brief guide, you will find instructions that will allow you to dismantle and replace the bulbs of the number plate lights on the Peugeot 208.…
How to Install Wind Deflectors on the Peugeot 208?
How to Install Wind Deflectors on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To install the wind deflectors on the Peugeot 208, use a screwdriver to pry up the seal around the door glass. At the top right corner and the bottom…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos