Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Lights on the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: License plate light

In this brief guide, you will find instructions that will allow you to dismantle and replace the bulbs of the number plate lights on the Peugeot 208. First, open the boot lid and start removing the lining of the boot lid; then disconnect the electrical connector of the number plate light units to remove them, as shown in the video. At this point, install the new light units with the new number plate lights, securing them properly; for replacing just the bulbs, simply lever off the outer cover, removing and replacing the lights.

Posted on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the license plate light of the Peugeot 208
How to replace the license plate light of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If the license plate light of your Peugeot 208 first series has suddenly stopped working, you must replace it as soon as possible with a new one. In …
How to Change the Number Plate Bulbs on a Peugeot 208
How to Change the Number Plate Bulbs on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, learn how to remove and replace the number plate bulbs on a Peugeot 208 by following these simple and quick steps. First, move to t…
How to replace the license plate light of the Peugeot 208
How to replace the license plate light of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Replacing the license plate light on your first generation Peugeot 208 is really simple, and thanks to the procedure described in our new guide, you …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos