Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on a Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

See other generations:
Video tutorial

As shown in this tutorial, replacing the number plate lights on a Peugeot 208 is an extremely simple and quick task. To do this, in addition to the correct LED replacement parts, you will need a plastic spatula or a flat-head screwdriver.

Start by opening the boot. Then, unclip the first lamp holder by prising it out from the slot on the outer side.

Once removed, disconnect the power connector, attach the replacement, and refit it into the designated slot. Repeat the process for the opposite light if necessary.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to replace the cabin filter in the Peugeot 208?
How to replace the cabin filter in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the cabin air filter in your Peugeot 208 Mk1 is a very important task, but fortunately, it takes only a few seconds to complete. Below you …
Replacing the Front Light Bulb of the Peugeot 208
Replacing the Front Light Bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Need to replace the front light bulb? Here’s how to replace the bulb from inside the light of a Peugeot 208. Open the bonnet, and remove the light co…
How to Reset the "Service" Light on a Peugeot 208
How to Reset the "Service" Light on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Before you can begin, sit in the driver's seat of your Peugeot 208. Start by pressing and holding the "SET" button located at the bottom right of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos