Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Cabin air filter

Replacing the cabin air filter in your Peugeot 208 Mk1 is a very important task, but fortunately, it takes only a few seconds to complete. Below you will find all the necessary instructions. First, switch off the car to perform the entire procedure without any risk to your health. Next, lift the front bonnet and remove the grille located at the top of the engine compartment (passenger side). Once this is done, locate the filter box inside the compartment and remove the cover. Finally, replace the old filter with the new one.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a Peugeot 208
How to Replace the Pollen Filter on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to replace the pollen filter on a Peugeot 208? The filter is not located inside the cabin but in the engine bay, follow these steps for disassemb…
How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Replacing the cabin air filter in your second-generation Peugeot 208 is very simple. To complete the operation, you must read the following guide and…
How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the cabin air filter in your first generation Peugeot 208 by yourself, you need to follow the steps described in the following gu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos