Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Air filter

Today, you will perform the air filter replacement on a Peugeot 208 MK1 vehicle. Turn off the car and pull the handbrake, then pull the bonnet release lever to open it. Remove the engine cover and using a flat screwdriver, disconnect the electrical connector from the air duct; push on the tab and lift the connector support cap. Remove the connector tube by pushing on the two tabs. Using a 25 mm Torx screwdriver, unscrew the three screws and remove the flange, detaching it from the air duct. Remove the old filter and insert the new one. Close the flange cover, tilting it so that the tabs go in first, then rotate the flange to connect it to the air intake duct and screw the three screws back in. Reconnect the connector and reattach the electrical connector.

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the air filter of the Peugeot 208
How to change the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you are looking for a guide to help you complete the replacement of the engine air filter for your Peugeot 208, then all you have to do is pay att…
How to Replace the Air Filter on a Peugeot 308
How to Replace the Air Filter on a Peugeot 308
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, you will learn how to replace the air filter in a Peugeot 308. Open the bonnet and disconnect the intake hose by pressing on the sides…
How to Remove the Engine Air Filter of a Peugeot 208
How to Remove the Engine Air Filter of a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Let's see how to remove and replace the engine air filter of a Peugeot 208. Lift the front engine bonnet and secure it. Remove the protection panel a…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos