Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

Before you can begin, sit in the driver's seat of your Peugeot 208. Start by pressing and holding the "SET" button located at the bottom right of the instrument panel. While holding this button, activate the instrument panel. After doing this, continue to hold the button for another ten seconds. Once the ten seconds have passed, release the button. When you have completed this step, you will have reset the "Service" light on your Peugeot 208.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) Good morning, today's goal is to reset the "Service" light of our Peugeot 208. Before being able to do this, we must make sure that we have carried o…
How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the "Service" light on a Peugeot 208, follow these steps. First, make sure the key is in the "Off" position. Then, press and hold the button…
How to reset the "Service" light on a Peugeot 208?
How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, start by turning on the instrument panel. Then, access the onboard computer using the buttons on the s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos