Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Service warning light

To reset the "Service" light on a Peugeot 208, follow these steps. First, make sure the key is in the "Off" position. Then, press and hold the button on the right side of the instrument panel. Start the car while keeping the button pressed. After about 10 seconds, the "Service" light will start flashing and you will hear an audible signal. At this point, release the button. The "Service" light should be reset. Check on the instrument panel if the light has turned off. If the "Service" light does not turn off, repeat the procedure making sure to follow the steps correctly. If the light persists, it may be necessary to contact a specialized technician for further checks.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Peugeot 208 2022
How to reset the maintenance light on the Peugeot 208 2022
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) If you own a second series Peugeot 208 (year 2022) and want to manually reset the maintenance light that continues to stay on even after servicing yo…
How to reset the "Service" indicator on a Peugeot 208?
How to reset the "Service" indicator on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the "Service" light on a Peugeot 208, proceed by pressing and holding the button on the turn signal lever. While holding down this button, t…
How to reset the Service light on the 2022 Peugeot 208
How to reset the Service light on the 2022 Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To reset the service light of the 2022 Peugeot 208, we need to turn on the instrument panel and press the BC button on the left lever of the steering…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos