Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Peugeot 406

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

Video tutorial

In a few simple steps, we will see how to disassemble and remove the front door panel of the Peugeot 406, in simple steps. First, open the front door of the car and start removing the plastic cover of the handle; unscrew the fixing screws found on the sides of the panel and detach the plastic cover of the speaker, as shown in the video.

At this point, remove the door panel, disconnecting the handle cable found on the back, finally reassembling the trim and its plastics.


Posted on 10 October 2025 by ScegliAuto


Related tutorials

Removing the Door Trim on a Peugeot 406
Removing the Door Trim on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Want to remove the door panel? Here’s how to take off the cover panel of a Peugeot 406. To remove the cover panel, you need to take off some plastic …
How to remove the rear door of the Peugeot 406?
How to remove the rear door of the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) To remove the rear door of the Peugeot 406, you need to completely dismantle the panel by unscrewing the screws that secure it to the door: the screw…
Antenna Replacement for Peugeot 406
Antenna Replacement for Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Let's replace the antenna support on a Peugeot 406. Remove the interior light or the car panel. Use a screwdriver to pry at the roof panel, lowering …

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos