Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2002 Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Service warning light

When we need to reset the service light related to the maintenance, we must turn on the instrument panel of the Peugeot 206 and press the button located on the odometer. By keeping the button pressed, we will start the countdown towards the reset of the light. Once the countdown is finished, we restart the instrument panel to complete the operation. If the service light does not reset, it will be necessary to go to an authorized workshop to perform a computerized diagnosis and reset the light through it. The main cause of the failure to reset is related to the oil level sensors.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 206
How to Reset the Service Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This brief guide explains how to reset the service light for routine maintenance on a Peugeot 206. First, get into the vehicle and press and hold the…
How to Reset the Service Light on a Peugeot 206 CC
How to Reset the Service Light on a Peugeot 206 CC
Peugeot 206 (1998-2012 / MK 1) Let's see how to reset the service light on a Peugeot 206: Turn off the ignition (remove the key or press the Stop button if it is a keyless version)…
How to Replace the ABS Sensor and Reset the Light on a Peugeot 206
How to Replace the ABS Sensor and Reset the Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Next, we will see the steps to remove and replace the ABS sensor and reset the light that appears on the dashboard of the Peugeot 206. First, lift th…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos