Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a 2024 Peugeot 2008 GT Line

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part:

In this video, we will see how to reset the tyre pressure light on a 2024 Peugeot 2008 GT Line, which remains illuminated after correctly inflating the tyres. We will have verified this detail by comparing it with the data posted on the driver's door; check for any air leaks or damage to the tyres. The car must be parked on a flat surface and the engine must be off. Turn on the car without starting the engine, go to the main menu via the multimedia screen and select "settings", then "vehicle" or "safety" and then "tyre pressure". When the reset message appears, confirm it and wait for confirmation. If the light remains on, drive for a few minutes: some models require a short drive for the sensors to recalibrate. If problems persist, there may be a faulty TPMS sensor or an electronic error.

Posted on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 2008?
How to Reset the Tyre Pressure Light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) The tyre pressure indication that will appear on the display of the Peugeot 2008 can be cleared by turning on the instrument panel to access the menu…
How to reset the TPMS light on the Peugeot 2008.
How to reset the TPMS light on the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Today we will see how to reset the tire pressure warning light on a 2024 Peugeot 2008. To perform the reset process, we need to turn on the instrumen…
Resetting the Tyre Pressure Warning Light on a Peugeot 2008
Resetting the Tyre Pressure Warning Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) If the tyre pressure on your Peugeot 2008 drops, an orange warning light with the symbol of a tyre section and an exclamation mark will illuminate on…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos