Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Tire pressure warning light

To reset the tyre pressure light on the Peugeot 2008, first inflate the tyres to the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, turn the ignition key to switch on the instrument cluster: at this point, you can access the menu on the display in the centre of the dashboard. When you select the tyre pressure option, you can reset the light by confirming the message that appears on the display.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Peugeot 2008?
How do you reset the tire pressure warning light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In order to reset the tire pressure warning light of the Peugeot 2008, you first need to inflate the tires, bringing them to the recommended pressure…
How to reset the tire pressure warning light on the Peugeot 2008
How to reset the tire pressure warning light on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) In this article we will see how to reset the tire pressure warning light on the Peugeot 2008, a procedure that is useful in case the light does not r…
Reset of the TPMS indicator of the Peugeot 2008
Reset of the TPMS indicator of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) These brief and simple steps will show us the procedure to reset the tire pressure warning light on the Peugeot 2008. Before performing the TPMS rese…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos