Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Peugeot 2008, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press the button in the centre of the dashboard to access the menu on the display. At this point, select the option to reset the tyre pressure warning light, confirming with "Yes" to the message that will then appear on the display. After confirming the message, you will notice that the warning light will completely disappear from the instrument cluster.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Peugeot 2008?
How to reset the tyre pressure warning light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To reset the tyre pressure warning light on the Peugeot 2008, turn on the ignition to access the menu on the central display: press the button with t…
How to Reset the Tyre Pressure Warning Light on a Peugeot 2008
How to Reset the Tyre Pressure Warning Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) If you have noticed that the low tyre pressure warning light is illuminated on the dashboard, you need to check the tyre inflation pressures and, if …
How to reset the tyre pressure warning light on the Peugeot 2008
How to reset the tyre pressure warning light on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To reset the tyre pressure warning light on the Peugeot 2008, follow these steps: Start the car: Ensure the engine is running and the vehicle is in p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos