Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Wing of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019

The instructions in this guide will allow you to remove and replace the front wing of the Peugeot 208. First, open the vehicle's bonnet and start unscrewing the fixing screws located at the top of the front wing, attached to the bodywork; disconnect the passage and unscrew the additional lower screws, as shown in the video. At this point, install the new front wing after painting it; reassemble and secure the wing to the bodywork, applying the reverse procedure!

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front fender of the Peugeot 308?
How do you remove the front fender of the Peugeot 308?
Peugeot 208 (2012-2019 / A9, MK 1) The car on which the protagonist describes the method of disassembling the front fender is a Peugeot 206, but it is also suitable for the Peugeot 208…
Guide to Removing the Dashboard of the Peugeot 208
Guide to Removing the Dashboard of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, see the main procedure that will allow you to remove the dashboard of the Peugeot 208 by following the instructions below. First, get …
Removing the Front Headlight and Bumper on a Peugeot 208
Removing the Front Headlight and Bumper on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This guide outlines the main steps to remove and replace the front headlight on a Peugeot 208. First, open the bonnet and remove the plastic cover lo…

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos