Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : Peugeot 208 dashboard disassembly guide

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Dashboard
Operation: Peugeot 208 dashboard disassembly guide

Let's see in this guide the main procedure that will allow us to remove the dashboard of the Peugeot 208, following the instructions below. First we get on board the car and start by removing the steering wheel and its airbag, disconnecting the electrical connector and unscrewing the central screw; after which we also disassemble the instrument panel by unscrewing the side screws. At this point we move on to the disassembly of the central instrumentation; we remove the car radio and the air conditioning controls. Now let's disassemble the glove box and unscrew all the screws on the dashboard to remove it!


Posted on 8 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 208 2012-2019 - Why did the antipollution warning appear on the Peugeot 208? Read Answer
    • 208 2012-2019 - What are the main lights that we find within the framework of a Peugeot 208? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos