Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Steering Wheel Airbag of the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

In a few simple steps, you will see the procedure for removing and replacing the steering wheel airbag of the Peugeot 208. First, get inside the vehicle and insert a thin, pointed tool into the rear hole of the steering wheel (located on the side) to release the airbag from the steering wheel; then disconnect the electrical connector located at the back to remove it, as shown in the video.

At this point, if necessary, you can also remove the steering wheel by unscrewing the central bolt; then install the airbag, securing it properly by applying the reverse procedure!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Disassembly of the steering wheel of the Peugeot 208
Disassembly of the steering wheel of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today we will discover in this short guide the procedure for disassembling and replacing the steering wheel of the Peugeot 208. To begin, we climb ab…
Guide to Removing the Dashboard of the Peugeot 208
Guide to Removing the Dashboard of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this guide, see the main procedure that will allow you to remove the dashboard of the Peugeot 208 by following the instructions below. First, get …
How to Reset the Airbag Control Unit of the Peugeot 208?
How to Reset the Airbag Control Unit of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To reset the airbag control unit of the Peugeot 208, connect the diagnostic tool to the vehicle's OBD port: this port is located at the bottom left o…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos