Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Airbag on a Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Airbag

These brief and simple steps will allow you to remove and replace the steering wheel airbag on a Peugeot 3008. First, open the bonnet of the vehicle and disconnect the battery terminals; then insert a sharp tool into the rear hole of the steering wheel to release the internal lever of the airbag, disconnecting its electrical connector to remove it, as shown in the video. By unscrewing the central screw, you will also remove the steering wheel; replace the airbag with a new original one, securing it correctly and resetting any airbag fault light.

Posted on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the radio from the Peugeot 3008
How to remove the radio from the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Removing the steering wheel airbag of the Peugeot 3008 on your own is a simple and quick operation to perform. Before removing the airbag, we must di…
Removing the Steering Wheel Airbag on Peugeot 3008
Removing the Steering Wheel Airbag on Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) As shown in the video, it is advisable to disconnect the battery before starting the procedure for safety reasons. Rotate the steering wheel until yo…
How to remove airbag and steering wheel from a Peugeot 3008 MK2
How to remove airbag and steering wheel from a Peugeot 3008 MK2
Peugeot 3008 (2016-2023 / MK 2, P84) Let's see how to remove the airbag and steering wheel from a Peugeot 3008 MK2: before doing any work on the airbag, it is essential to disconnect the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos