Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove airbag and steering wheel from a Peugeot 3008 MK2

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Airbag

See other generations:
Video tutorial

Let's see how to remove the airbag and steering wheel from a Peugeot 3008 MK2: before doing any work on the airbag, it is essential to disconnect the battery, to prevent the module from accidentally exploding in our face. We will need a small screwdriver, to insert it into the small hole located on the right side of the steering wheel, at the back.

This is used to release the airbag spring, so that we can remove the module, after disconnecting the large electrical connector located right below it. Then, with a socket wrench of the appropriate size, we will need to unscrew the central screw of the steering wheel and remove it.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

Removing the Steering Wheel Airbag on a Peugeot 3008
Removing the Steering Wheel Airbag on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) These brief and simple steps will allow you to remove and replace the steering wheel airbag on a Peugeot 3008. First, open the bonnet of the vehicle …
How to remove the radio from the Peugeot 3008
How to remove the radio from the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Removing the steering wheel airbag of the Peugeot 3008 on your own is a simple and quick operation to perform. Before removing the airbag, we must di…
Removing the Steering Wheel Airbag on Peugeot 3008
Removing the Steering Wheel Airbag on Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) As shown in the video, it is advisable to disconnect the battery before starting the procedure for safety reasons. Rotate the steering wheel until yo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos