Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Control Unit of the Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To reset the airbag control unit of the Peugeot 208, connect the diagnostic tool to the vehicle's OBD port: this port is located at the bottom left of the dashboard, near the steering column. Once the scanner is connected, select the car model and the corresponding version; this will allow you to reset all the errors stored in the airbag control unit, returning it to its default settings.

After the reset, disconnect the scanner and check that everything is functioning.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Steering Wheel Airbag of the Peugeot 208
Removing and Replacing the Steering Wheel Airbag of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In a few simple steps, you will see the procedure for removing and replacing the steering wheel airbag of the Peugeot 208. First, get inside the vehi…
Disassembly of the steering wheel of the Peugeot 208
Disassembly of the steering wheel of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today we will discover in this short guide the procedure for disassembling and replacing the steering wheel of the Peugeot 208. To begin, we climb ab…
Replacing the Battery on Peugeot 208
Replacing the Battery on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this video tutorial, you will see how to remove and replace the battery on a Peugeot 208. First, open the bonnet and disconnect the two battery te…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - How to reset the SMEG car stereo in the Peugeot 208? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos