Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

In this video tutorial, you will see how to remove and replace the battery on a Peugeot 208. First, open the bonnet and disconnect the two battery terminals: then remove the control unit to its right by releasing it from the clips and pulling it upwards. At this point, underneath, you will find a plastic clip that you will need to release with something sharp. Once the support is removed, extract the old battery and replace it with the new one. Refit the plastic support and then the control unit and terminals.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / A9, MK 1) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How do you remove the power supply battery of the Peugeot 208?
How do you remove the power supply battery of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) The power supply battery of the Peugeot 208 requires common assembly and disassembly operations to be kept in mind when replacing it. We open the eng…
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos