Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of this area. To remove it, you will need to detach the plastic protective cover on top so that the terminals can be disconnected. Once the cables are disconnected, you can loosen the fixing bolts and extract the battery from its housing. You can then insert a new replacement battery, which must be properly secured and connected to the cables.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) Below we will see the instructions that will allow us to disassemble and replace the clutch kit of the Peugeot 208 1.6 BlueHDi. First, we open the ho…
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as o…
Removing the Rocker Cover on the Peugeot 208 1.6 BlueHDi
Removing the Rocker Cover on the Peugeot 208 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, learn how to perform a full service on the Peugeot 208; however, in addition to changing the engine oil, you will also replace the roc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos