Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Clutch

Below we will see the instructions that will allow us to disassemble and replace the clutch kit of the Peugeot 208 1.6 BlueHDi. First, we open the hood of the car and start disassembling and removing the battery and battery holder, disconnecting the terminals and unscrewing all the fixing screws; then we disconnect the clutch cable, unscrewing the upper screws of the gearbox casing, as shown in the video. At this point we lift the car and disconnect the front driveshaft, then remove the clutch cover; we replace the latter with the new original one, following the video tutorial until the end!

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the clutch pedal of the Peugeot 208
Replacement of the clutch pedal of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this guide, we will see the main instructions that will allow us to disassemble and replace the clutch pedal of the Peugeot 208. First of all, we …
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of th…
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as o…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos