Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the clutch pedal of the Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026

In this guide, we will see the main instructions that will allow us to disassemble and replace the clutch pedal of the Peugeot 208. First of all, we open the hood of the car and start disconnecting the clutch cable from the pedal cylinder; we find it at the bottom of the engine compartment, near the transmission, as shown in the video. At this point, we open the front door and proceed with the disassembly of the clutch pedal, unscrewing the fixing screws; we replace it with the new one, installing the original one, then connecting the clutch cable.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) Below we will see the instructions that will allow us to disassemble and replace the clutch kit of the Peugeot 208 1.6 BlueHDi. First, we open the ho…
How to Replace the Clutch Discs on the Peugeot 208
How to Replace the Clutch Discs on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Below are the steps to remove and replace the clutch discs on the Peugeot 208. First, raise the vehicle and begin by removing the front right wheel; …
How do you replace the clutch of the Peugeot 208?
How do you replace the clutch of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the clutch of the Peugeot 208, you need to lift the car so that you can access the components in the lower part of the engine com…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos