Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Clutch

See other generations:
Video tutorial

Below are the steps to remove and replace the clutch discs on the Peugeot 208. First, raise the vehicle and begin by removing the front right wheel; then unscrew the bolts of the wishbone and subsequently remove the front driveshaft, as shown in the video.

At this point, unscrew the bolts of the gearbox to remove it, gaining access to the clutch discs; remove the entire clutch kit and replace it with the new one, finally reassembling the gearbox and subsequently securing the driveshaft and wishbone!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Replacement of the clutch pedal of the Peugeot 208
Replacement of the clutch pedal of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) In this guide, we will see the main instructions that will allow us to disassemble and replace the clutch pedal of the Peugeot 208. First of all, we …
How to Replace the Clutch on the Peugeot 208?
How to Replace the Clutch on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To carry out the replacement of the clutch on the Peugeot 208, lift the car to gain access to the components at the bottom of the engine bay: here yo…
How to change the front discs and pads on the Peugeot 208
How to change the front discs and pads on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This detailed video shows how to replace the pads and discs on a first model Peugeot 208. Follow the steps: with the car off and handbrake engaged, o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos